Monday, August 2, 2010

[MW:6249] RE: 6219] vacuum chamber

What is your exact requirement?

 

Shirish G

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Devang Patel
Sent: Saturday, July 31, 2010 5:57 PM
To: materials-welding@googlegroups.com
Subject: [MW:6219] vacuum chamber

 

Does anybody have a technical information about Vacuum Chamber(1x10-6 mbar)?

 

Regards,
Devang Patel | Sr. Manager Engineering
Inox India Ltd. | 4th Floor, ABS Tower, Old Padra Road, Vadodara. Guj. India.
Voice: + 91-265-3056100 ext. 392 | Fax: +91-265-2341449 | Mobile: +91 9879803401
Email: devangp@inoxindia.com | web: www.inoxindia.com

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:34916] Applicability of Impact requirement as per ASME B31.3

Dear All, Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX Material  to be used used during Fabrication - SA 333Gr6 (P No.1 G...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...