Tuesday, August 3, 2010

Re: [MW:6281] Mechanical Tests for PQR

Nandesh,
 
I am not much bothered about project specifications as it vary depends on operating company or main contractor requirements.I feel it is baseless and useless sometimes when we are thinking logically.So ,I am searching for answers based on code(ASME BPV,API 1104 and AWS D1.1),that is why I mentioned the corresponding codes clearly in my query.Expecting some contribution from other members of this forum
 
Thanks and Regards
 
Limesh

On Tue, Aug 3, 2010 at 11:19 AM, Nandesh Kumar <nandeshkumar@rocketmail.com> wrote:
Limesh,
 
Go through the applicable code and project specs....each code/spec needs different tests, though there are some common tests.
 
Nandeesh

--- On Tue, 3/8/10, limesh M <limesh78@gmail.com> wrote:

From: limesh M <limesh78@gmail.com>
Subject: [MW:6274] Mechanical Tests for PQR
To: "Materials & Welding" <materials-welding@googlegroups.com>
Date: Tuesday, 3 August, 2010, 5:18 AM


Dear All,

What are all the mechanical tests rquired during PQR with respect to
different codes like ASME BPV,API 1104 and AWS D1.1?Is chemical
analysis mandatory requirement for PQR?Is it possible to waive Macro
examination?It will be highly appreciated if any one could explain in
detail with example.


Thanks and Regards,


Limesh

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...