Thursday, August 5, 2010

Re: [MW:6321] How To Become Registered Professional Engineer(RPE)

you can get one @ http://www.onetb.com/registered_eng.htm


On Thu, Aug 5, 2010 at 5:42 PM, JASPAL SINGH <jaspaldhesi@gmail.com> wrote:
Dear All,

As per ASME-Section III,  For N-Stamp manufacturing it is required to
get the design report certify & reviewed from RPE(Registered
Professional Engineer)

Which organisation is conducting the examination for the same.

Otherwise if we want to hire some RPE for our company, what is the
way.

If someboday have the list of RPE, Please arrange.

Regards

Jaspal Singh, CWI-AWS, CSWIP-3.1
Assistant Manager – Quality Assurance
Process Equipment Division
ISGEC, Yamuna Nagar, Haryana -135001
Phone: 911732307251
Ext: 251 Mb: +91 9996624244



--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34916] Applicability of Impact requirement as per ASME B31.3

Dear All, Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX Material  to be used used during Fabrication - SA 333Gr6 (P No.1 G...