RE: [MW:6393] Fwd:How to check the Flange raised face serration area.

Dear Mr. B. Raghuram

We use the third one below.

But I look for visual comparator for easy use and decide...

Regards.

Nebi ÖZHAN
Quality Group (QA/QC) Manager
Tel: +90 224 519 02 50/Ext:1501,
Fax: + 90 224 519 02 56, + 90 224 519 02 70
Mobile: + 90 532 423 23 60
e-mail:nozhan@cimtas.com.tr

"Bathula Raghuram
(Mumbai -
PIPING)" To
<R.Bathula@ticb.c "'materials-welding@googlegroups.co
om> m'"
Sent by: <materials-welding@googlegroups.com
materials-welding >
@googlegroups.com cc

Subject
09.08.2010 11:22 RE: [MW:6392] Fwd:How to check the
Flange raised face serration area.

Please respond to
materials-welding
@googlegroups.com

Dear Mr. Nebi ÖZHAN

You can search on the web for availability of these comparators in your
location.
Few models are given below
GAR Miscrofinish S-22
Flexitallic Microsurf Model 119
Mitutoyo surftest model 211

-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of
nozhan@cimtas.com.tr
Sent: Monday, August 09, 2010 1:38 PM
To: materials-welding@googlegroups.com
Subject: Re: [MW:6391] Fwd:How to check the Flange raised face serration
area.

Hi,

Where can I found this master block?

Could you give me advice?

Nebi ÖZHAN
Quality Group (QA/QC) Manager
Tel: +90 224 519 02 50/Ext:1501,
Fax: + 90 224 519 02 56, + 90 224 519 02 70
Mobile: + 90 532 423 23 60
e-mail:nozhan@cimtas.com.tr

Sajeev P
<sajeevlaxmi@gmai
l.com> To
Sent by: materials-welding@googlegroups.com
materials-welding cc
@googlegroups.com
Subject
Re: [MW:5860] Fwd:How to check the
05.07.2010 08:43 Flange raised face serration area.

The Flange face finishing is checked with visual comparators as per ASME
B46.1. Which is clearly specified in  ASME B16.5 Para 6.4.5.

Thanks & Regards,

Sajeev

On Mon, Jul 5, 2010 at 5:58 AM, James cyrilandrew <jcyrilandrew@gmail.com>
wrote:

---------- Forwarded message ----------
From: James cyrilandrew <jcyrilandrew@gmail.com>
Date: Sun, Jul 4, 2010 at 5:37 AM
Subject: DOUBT-
To: Material welding groups <materials-welding@googlegroups.com>

Hi,    I want to check the flange serration area. whether the
machining
microns is meeting the requirement. how to check .what is the
instrument used. what is the standard to compare.

thanks.

Regards,
J.Cyril Andrews
Qatar

Filtered by Hosted Filtering

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions
w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.