Saturday, August 14, 2010

RE: [MW:6489] Re: Welder qualified

Dear Prasanna,

I completely disagree with your comments .your comment may be applicable for WPS and PQR not for Welder Qualifications.Pls.FInd below the comments .


For example..welder qualify for SMAW,as per QW353 Change in P-Number is essential..but as mentioned in QW403.18 - A change from one P number to any other P-number or to a base metal not listed in table QW/QB422,"EXCEPT AS PERMITTED IN QW-423 AND IN QW-420.2."


More over QW-420.2 has been deletd in 2009b addenda.


And in QW-423 it is permitted to weld if the welder qualify with


P.Number-1 thru P.No.15F,P.No.34,P.No.41 thru 49.he can qualify for P.No.1 thru 15F,P.No.34,P.No.41 thru 49.


So ,If WPS avilable for P.Number-4 and F.Number (in this case it is same F-Number),Position and Diameter of pipe meets the criteria he can weld the P.number-4.


Thanks & Regards,


(karthik)




Karthikeyan.S
 
Getabec Energy Co.,Ltd.
379,Moo6,Soi8,Nikhomphatana,
Rayong-21180,
Thailand.
Phone: 0066 38 897035-8 (Off)
Fax: 0066 38 897034
Hand Phone: 0066 892512282


--- On Sat, 8/14/10, PRASANNA <prasanna5285@gmail.com> wrote:

From: PRASANNA <prasanna5285@gmail.com>
Subject: RE: [MW:6486] Re: Welder qualified
To: materials-welding@googlegroups.com
Date: Saturday, August 14, 2010, 5:09 AM

Dear All,

 

As P-Number is an essentially variable, when the welder qualified with the P-1 WPS,PQR cannot be used for the P-4 material, hence requalification if required. It is for your kind attention QW 433 describes about F-No. only not about the P number.

 

Regards,

Prasanna.R.U.

Bureau Veritas,Chennai

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Muhammed Ibrahim PK
Sent: 13 August 2010 17:26
To: materials-welding@googlegroups.com
Subject: Re: [MW:6482] Re: Welder qualified

 

Hi,

 

Yes, he can weld with backing. Refer QW 433 table.


Thanks & Regards
Muhammed Ibrahim PK


On 13 August 2010 14:46, Balaji <balaji.weldingeng@gmail.com> wrote:

Dear Venkat
                 Nope. He can't weld P-4 material using
E8028 electrodes, since F numbers are different. As per Sex IX, for
welder qualification, F numbers are essential variables.


Regards

Balaji
On Aug 12, 2:53 pm, venkat ramana <venkatgps.ram...@gmail.com> wrote:
> Dear All,
>
> Please let me know, my query is A welder was qualified with a P-1 test
> coupon using SMAW E7018 electrodes. May the welder weld P-4 material using
> E8028 electrodes with backing in production? (Assume the P-4 procedure using
> E8028 electrodes has been qualified)
>
> Thanks & Regards
> Venkat

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

 

__________ Information from ESET NOD32 Antivirus, version of virus signature database 5361 (20100812) __________

 

The message was checked by ESET NOD32 Antivirus.

 

http://www.eset.com

 

__________ Information from ESET NOD32 Antivirus, version of virus signature database 5365 (20100813) __________

 

The message was checked by ESET NOD32 Antivirus.

 

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature database 5365 (20100813) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...