Hi,
Simulation heat treatment is performing on sample piece of material to be used in production.
If the production required PWHT for 2 Hrs, do PWHT in the sample piece of the material for three cycle. ie 6hrs. then carry out the tensile test and hardness test & if applicable impact also.
If any production repair required we have to confirm the property of material is safe after multiple PWHT.
Thanks & Regards
Muhammed Ibrahim PK
On 16 August 2010 23:06, asad azmi <azmiasadayub@gmail.com> wrote:
--Dear All,Greetings.what is simulation Treatment and where it is applicable.Please expalin with example in reference to ASME SEC VIII DIV 1/ASME SEC IIThanks in advance.RegardsAsad
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment