Tuesday, August 31, 2010

Re: [MW:6791] A 217 Gr WC9

Hi Luis,
I hope the attached Bohler data sheet will be useful. Please let me know if you found in it what you looked for.
Thanks,
Shashank Vagal

--- On Mon, 30/8/10, Luis Carlos <carlosflores126@hotmail.com> wrote:

From: Luis Carlos <carlosflores126@hotmail.com>
Subject: [MW:6788] A 217 Gr WC9
To: "Materials & Welding" <materials-welding@googlegroups.com>
Date: Monday, 30 August, 2010, 10:06 PM

Hello,

Could someone tell me please what is the best filler metal to make a
buttering over A-217 Gr WC9 base metal.

Are there special recommendations?

I will appreciate answers!

Luis Carlos

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...