RE: [MW:6813] A 217 Gr WC9

Hi Shashank,
 
Thanks for attachment.
I found on it the T23 filler metal for 2.25Cr-1Mo. I will make a comparison between it and others that Pgoswami has suggested.
 
Thanks for your interest Shashank.
 

L. Carlos Flores

Piping Team Leader

Oficina:(993) 310 8100 Ext. 106

Celular:(993) 250 6610

 

---

Date: Tue, 31 Aug 2010 05:24:01 +0530
From: nach_sam@yahoo.com
Subject: Re: [MW:6791] A 217 Gr WC9
To: materials-welding@googlegroups.com

Hi Luis, I hope the attached Bohler data sheet will be useful. Please let me know if you found in it what you looked for. Thanks, Shashank Vagal --- On Mon, 30/8/10, Luis Carlos <carlosflores126@hotmail.com> wrote: From: Luis Carlos <carlosflores126@hotmail.com> Subject: [MW:6788] A 217 Gr WC9 To: "Materials & Welding" <materials-welding@googlegroups.com> Date: Monday, 30 August, 2010, 10:06 PM Hello, Could someone tell me please what is the best filler metal to make a buttering over A-217 Gr WC9 base metal. Are there special recommendations? I will appreciate answers! Luis Carlos -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.