Friday, January 7, 2011

Re: [MW:9137] Welding of Clad Materials

Hi,
Iam sorry to say that you are not specific in your quirey in detail.Any how the simple steps are ,suitable wps,welder qualificatin,filler metal,cleanliness,preparation of joint(some 10mm between both side of c/s weld metal etc.,(these are all before start..during and after is many things)
I think you are already know the basics.if you need the specific details,pls..give your quirey in detail.

Thanks & Regards,

(Karthik)

Karthikeyan.S
QA/QC Manager
Getabec Energy Co.,Ltd.
379,Moo6,Soi8,Nikhomphatana,
Rayong-21180,
Thailand.
Phone: 0066 38 897035-8 (Off)
Fax: 0066 38 897034
Hand Phone: 0066 892512282


--- On Fri, 1/7/11, Suresh Babu <suresh75.babu@gmail.com> wrote:

From: Suresh Babu <suresh75.babu@gmail.com>
Subject: [MW:9127] Welding of Clad Materials
To: "Materials & Welding" <materials-welding@googlegroups.com>
Date: Friday, January 7, 2011, 3:10 PM

Dear Team,

What is the most important to be checked before start welding of Clad
Material?.

Thanks in Advance.
suresh.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...