Saturday, January 22, 2011

Re: [MW:9401] RE: 9372] AC welding for P5A & P5C

Thanks Amitabha,
 
As I know by AC welding oxygen pick up (Generally 160~200 ppm) during welding is quite less than DC welding (Generally 250~300 ppm) which gives you a better toughness property.
 
But, how the Oxygen pick up is less in AC welding?
 
Kindly explain mechanism of the same.
 
Regards,
Bhavesh Patel


On Fri, Jan 21, 2011 at 5:33 PM, amitabha.bhattacharya <amitabha.bhattacharya@bwgindia.com> wrote:
Hi Bhavesh,
You may expect higher toughness values with AC welding for CrMo-steels.
Thanks
Amitabha

-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of JIGO
Sent: Friday, January 21, 2011 2:55 PM
To: Materials & Welding
Subject: [MW:9372] AC welding for P5A & P5C

Dear All,


Why we are using AC current for SAW welding in low alloy steel (Mainly
for P5A & P5C) ?

Kindly share your valuable input.


Regards,
Bhavesh Patel
ISGEC, Dahej

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions
w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...