There are mainly 2 purposes to carry out buttering:-
(1) To compensate for poor joint preperation (wide root gap), material is added to both faces of joint.
(2) to avoid PWHT , not to sensitize material, for eg:- Stainless steel,
Regards
Manpreet Singh
On Mon, 24 Jan 2011 18:29:23 +0530 Fitria Rahman
>
Dear Mehta
Buttering weld is procedure to rectify wide gaps(root openings) greater than those permitted by AWS D11 (normally found intubular joint in structural connection) and/or client specification, but notgreater than 19 mm or twice the thickness of the thinner part, whichever islesser. Procedure shall be qualified.
Fitya a
>
>
2011/1/25 B D Mehta <bdmehta.sap@isgec.com>
>
>
--Dear All
Any body can explain me why we do buttering on weld edges ofsimilar materials before welding .
Regards
B.D.Mehta
>To post to this group, send email to materials-welding@googlegroups.com
>To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>
> --
>To post to this group, send email to materials-welding@googlegroups.com
>To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment