Wednesday, April 24, 2013

[MW:17542] Re: PSL1 & PSL2 types in API 5L

Dear Experts ,

Can one of U share with me about API 5L pipes for the following doubts  :

1) On what design conditions, we can use PSL 1 & PSL 2 from the below mentioned types ?
 
 


2) Among these types, what type shall be used for Low Tempr service and what will be the lowest Tempr. can it be withstand ?


3) 

    Why is charpy Impact test not required ? Is that tensile strength related ?


I apologize , if these queries are not reasonable to any one of U .

Cheers,
Saravanan.





On Wed, Apr 24, 2013 at 2:05 PM, Alpesh Sakhreliya <alpeshsakhreliya@gmail.com> wrote:
Dear

pl ref STD. API 5l 45th Edti.


On Wed, Apr 24, 2013 at 12:47 AM, sajidalam mohd. <engineer_makes_world@yahoo.co.in> wrote:
DEAR ALL
                GOOD DAY
I WANT TO KNOW FOR CARBON STEEL PIPE-PSL-2 (SAW WELDING) SKELP PORTION/SKELP PIPE SHOULD BE HYDRO TESTED OR NOT AT THE TIME OF MPQT.

THE SAMPLE FOR MECHANICAL TEST  SHOULD BE HYDRO TESTED  OR NOT IN SAW WELDED PIPE???ITS MANDATORY THAT SAMPLE FOR MECHANICAL TEST SHOULD BE HYDRO  TESTED IN SAW PIPE /PSL-2 DURING PRODUCTION AND AT THE TIME OF MPQT?PLEASE GIVE REFERENCES OF CODE AND STD.

REGARDS
MD S ALAM
MECH ENGINEER
DAMMAM-SAUDI

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 



--

Best Regards,

 

Alpesh Sakhreliya

Mobile:+91 9898265772

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...