Friday, August 27, 2010

RE: [MW:6747] Comparison between CP189 and SNT-TC-1A 2006 edition

I'm working in a project where the client ask for follow ASNT recomendations for PND technicians. The subcontractor is APPLUS RTD and they have showed certifications with canadians and european organizations. Should we ask them ASNT certifications for their technicians?

Eduardo Calva



 



From: R.Bathula@ticb.com
To: materials-welding@googlegroups.com
Date: Fri, 27 Aug 2010 02:41:16 -0700
Subject: [MW:6740] Comparison between CP189 and SNT-TC-1A 2006 edition

for info..
-----Original Message-----
From: PEMMARAJU RAGHAVENDRA [
mailto:rpe@hzw.ltindia.com]
Sent: Friday, August 27, 2010 10:30 AM
To: Bathula Raghuram (Mumbai - PIPING)
Subject: Re: FW:
Thanks Raghuram.
I have prepared a comparison sheet as per attachment.
FYI
Regards,

>>> "Bathula Raghuram (Mumbai - PIPING)" <R.Bathula@ticb.com> 27/08/2010
>>> 08:59 am >>>


Bill Plumstead Jr.<http://www.linkedin.com/groups?viewMemberFeed=&gid=122787&memberID=46511406&goback=%2Egmp_122787>
* CP-189 is a STANDARD and SNT-TC-1A is a RECOMMENDED PRACTICE. CP-189 has requirements that must be met whereas SNT-TC-1A recommendations can be modified to met the needs of the employer. A couple of key points for comparison:
- SNT-TC-1A has 3 levels of qualification (Level I, Level II, Level III)
- CP-189 has 6 levels of qualification (Trainee, Level I, Level II, Level II Limited, Level III, NDT Instructor)
- CP-189 requires the Level III to hold a current ASNT certificate in the method
- CP-189 requires training of Level I and Level II personnel by a qualified NDT Instructor


________________________________________
From: PEMMARAJU RAGHAVENDRA [rpe@hzw.ltindia.com]
Sent: Saturday, August 21, 2010 1:05 PM
To: Bathula Raghuram (Mumbai - PIPING)
Subject: Comparison between CP189 and SNT-TC-1A 2006 edition

Do you have the comparison between above two documents of ASNT,.

Regards,

Larsen & Toubro Limited
www.larsentoubro.com





--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...