Monday, January 31, 2011

[MW:9562] PCM (Parameter Crack Measurement)

Dear All,

 

Please suggest me any information about PCM (Parameter Crack Measurement).

 

Regards,

Firman

 

 

1 comment:

Unknown said...

ExxonMobil recommend a cracking parameter value of 0.23 for NACE defined sour service. The formula used is as follows:

Pcm = C + Si/30 + (Mn+Cu+Cr)/20 + Ni/60 + Mo/15 + 5B

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...